Search
Close this search box.

V0 Fiber blowing machine

Compact fiber blowing machine for fiber installation.

Extremely compact electrically operated fiber blowing machine optimized for FTTX installation of blown fiber (EPFU) and micro/nano cables from 0.8 to 6 mm into microduct from 3 to 16 mm. A full digital control system with soft- start, electronic fiber security, memory functions, combined with high speed possibility makes the machine very easy and effective to use. Can be operated directly from its case.

Technical data

  • Battery: 18 V, 5 Ah Milwaukee connector
  • Max pressure: 232 psi
  • Pushing force: Up to 13.5 lbf
  • Cable diameter: 0.8 – 6 mm
  • Microduct: 3 – 16 mm
  • Weight: approx 4.4 pounds
  • Air connection: Std 3/8” Cejn
  • WxHxD: 4.72in×8.66in×6.69in.
Download datasheet
Download Manual

V0 Fiber Blowing Machine

  • Electrically operated. Battery connected. Optional power supply.
  • Allows installation in a larger conduit with a smaller compressor.
  • Electronic stopping/slipping protection within 250 ms.
  • Gentle operation, reduced cable pull with the aid of continuously variable pushing force.
  • Forward and reverse function
  • Display for current speed, distance, pushing force pressure and conduit air temp.
  • Max. speed: 820 ft/min.
  • Stepless pushing force on cable up to: 13.48 lbf.
  • Adjustable clamping force.
  • Works with JetLogger.
  • 110/240 V Power supply. No need to charge or change batteries
  • Table bracket. For safe installation on working table.
  • Metal drive wheel for < 2.5 mm cable.
  • Softstart: Enables an even smoother start protecting the fiber.
  • Memory: The last inserted data like pushing force will stay in the memory even if the device will be switched off or the battery need to be exchanged.
  • Service info: Memory of total milage/distance since machine taken into operation.
  • Conduit air temp: Display showing the air temperature injected into the conduit.
  • STD CONFIGURATION
  • Transport Case
  • 3 drive wheels
    • 1 pcs with rubber 0.8-3 mm
    • 1 pcs for 3.0-4.5 mm
    • 1 pcs for 4.5-6.5mm
  • Battery charger 230 V
  • 2 Batteries
  • 1 Bottle Micro Duct Lube
  • Service kit
  • Ground cable
  • ACCESSORIES FOR V0
  • Cable inlet guides
  • 110/240 V Power supply. No need to charge or change batteries
  • Table bracket. For safe installation on working table
  • Jetlogger. Electronic documentation system
  • Metal drive wheel for < 2.5 mm cable
  • External cable guide for V0-series case
  • 10 m. Airhose 3/8”
  • Cable seals
  • Jetair 100270 Compressor

  • Jetdrum K8 Drum Rack

  • V0 TRAINING VIDEO
  • V0 VIDEO
DISTRIBUTORS
products and accessories
Jetting UC
Site
Follow
Contact
Contact Us
en_US
en_US es_ES

Unlimited Suppliers.

CALIFORNIA

Chriss Herr
cherr@unlimitedsuppliers.com
M: (530)723-0004
 
Ron Hagerty
rhagerty@unlimitedsuppliers.com
M: (530) 723- 0257